d a t a sh eet product speci?cation supersedes data of 1998 apr 17 2001 sep 27 discrete semiconductors bgy67bo/4m optical receiver module h an db oo k , h a lf page m3d112
2001 sep 27 2 philips semiconductors product speci?cation optical receiver module bgy67bo/4m features excellent linearity extremely low noise excellent flatness standard catv outline rugged construction gold metallization ensures excellent reliability. applications reverse receiver amplifier in two-way catv systems in the 5 to 400 mhz frequency range. description hybrid high dynamic range optical amplifier module in a sot115u package operating at a voltage supply of 24 v (dc). the module contains a monomode optical input suitable for wavelengths from 1290 to 1600 nm, a terminal to monitor the pin diode current and an electrical output with an impedance of 75 w . pinning - sot115u pin description 1 monitor current 2,3,7,8 common 5+v b 9 output fig.1 simplified outline. handbook, halfpage 7 8 9 2 35 1 side view mlb162 quick reference data handling fibreglass optical coupling: maximum tensile strength = 5 n; minimum bending radius = 35 mm. symbol parameter conditions min. max. unit f frequency range 5 400 mhz s 22 output return losses f = 5 to 400 mhz 14 - db optical input return losses 40 - db d 2 second order distortion -- 70 dbc f equivalent noise input f = 5 to 400 mhz - 7 pa/ ? hz i tot total current consumption (dc) v b = 24 v 150 180 ma caution this product is supplied in anti-static packing to prevent damage caused by electrostatic discharge during transport and handling. for further information, refer to philips specs.: snw-eq-608, snw-fq-302a, and snw-fq-302b.
2001 sep 27 3 philips semiconductors product speci?cation optical receiver module bgy67bo/4m limiting values in accordance with the absolute maximum rating system (iec 60134). characteristics table 1 bandwidth 5 to 400 mhz; v b = 24 v; t mb =30 c; z l =75 w symbol parameter conditions min. max. unit f frequency range 5 400 mhz t stg storage temperature - 40 +85 c t mb operating mounting base temperature - 20 +85 c p in optical input power continuous - 5mw esd esd sensitivity human body model; r = 1.5 k w ; c = 100 pf 500 - v symbol parameter conditions min. max. unit s responsivity l = 1300 nm 800 - v/w fl ?atness of frequency response - 0.3 db s 22 output return losses f=5to400mhz 14 - db optical input return losses 40 - db d 2 second order distortion note 1 -- 70 db note 2 -- 70 db d 3 third order distortion note 3 -- 80 db f equivalent noise input f=5to400mhz - 7 pa/ ? hz s l spectral sensitivity l = 1310 20 nm 0.85 - a/w l = 1550 20 nm 0.9 - a/w l optical wavelength 1290 1600 nm l length of optical ?bre ?bre; sm type; 9/125 m m1 - m i tot total current consumption (dc) note 4 150 180 ma notes 1. two laser test; each laser with 40% modulation index; f p = 30.25 mhz; p p = 0.5 mw; f q = 70 mhz; p q = 0.5 mw; measured at f p +f q = 100.25 mhz. 2. two laser test; each laser with 40% modulation index; f p = 200.25 mhz; p p = 0.5 mw; f q = 100 mhz; p q = 0.5 mw; measured at f p +f q = 300.25 mhz. 3. three laser test; each laser with 40% modulation index; f p = 325.25 mhz; p p = 0.33 mw; f q = 210.25 mhz; p q = 0.33 mw; f r = 135.25 mhz; p r = 0.33 mw; measured at f p +f q - f r = 400.25 mhz. 4. the module normally operates at v b = 24 v, but is able to withstand supply transients up to 30 v. handbook, halfpage mlb151 10 k w 1 k w pin 1 photo current fig.2 monitor current pin.
2001 sep 27 4 philips semiconductors product speci?cation optical receiver module bgy67bo/4m package outline unit a 2 max. c ee 1 q q max. q 1 q 2 u 1 max. u 2 w references outline version european projection issue date iec jedec eiaj mm 20.8 9.1 0.51 0.38 0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8 1000 4.15 3.85 2.4 38.1 25.4 10.2 4.2 44.75 8 0.25 0.1 12 bf 2.5 m 1.6 m 1 0.9 m 2 n min. 16.7 16.1 optical input s 1 4.95 4.55 s 2 p 6-32 unc y w s dimensions (mm are the original dimensions) sot115u 0 5 10 mm scale a max. d max. d max. l min. e max. z max. rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 unc and 2 extra horizontal mounting holes; optical input; 7 gold-plated in-line leads sot115u d u 1 q q 2 q 1 b f s s 1 s 2 a z p n n 1 n 2 m m 1 m 2 e a 2 l c d q u 2 m w 789 23 w e e 1 5 p 1 y m b y m b y m b b 10.7 n 1 max. 5 n 2 max. 99-04-13 01-08-10
2001 sep 27 5 philips semiconductors product speci?cation optical receiver module bgy67bo/4m data sheet status notes 1. please consult the most recently issued data sheet before initiating or completing a design. 2. the product status of the device(s) described in this data sheet may have changed since this data sheet was published. the latest information is available on the internet at url http://www.semiconductors.philips.com. data sheet status (1) product status (2) definitions objective data development this data sheet contains data from the objective specification for product development. philips semiconductors reserves the right to change the speci?cation in any manner without notice. preliminary data quali?cation this data sheet contains data from the preliminary specification. supplementary data will be published at a later date. philips semiconductors reserves the right to change the speci?cation without notice, in order to improve the design and supply the best possible product. product data production this data sheet contains data from the product specification. philips semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. changes will be communicated according to the customer product/process change noti?cation (cpcn) procedure snw-sq-650a. definitions short-form specification ? the data in a short-form specification is extracted from a full data sheet with the same type number and title. for detailed information see the relevant data sheet or data handbook. limiting values definition ? limiting values given are in accordance with the absolute maximum rating system (iec 60134). stress above one or more of the limiting values may cause permanent damage to the device. these are stress ratings only and operation of the device at these or at any other conditions above those given in the characteristics sections of the specification is not implied. exposure to limiting values for extended periods may affect device reliability. application information ? applications that are described herein for any of these products are for illustrative purposes only. philips semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. disclaimers life support applications ? these products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. philips semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify philips semiconductors for any damages resulting from such application. right to make changes ? philips semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. philips semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
2001 sep 27 6 philips semiconductors product speci?cation optical receiver module bgy67bo/4m notes
2001 sep 27 7 philips semiconductors product speci?cation optical receiver module bgy67bo/4m notes
? koninklijke philips electronics n.v. 2001 sca73 all rights are reserved. reproduction in whole or in part is prohibited without the prior written consent of the copyright owne r. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. no liability will be accepted by the publisher for any consequence of its use. publication thereof does not con vey nor imply any license under patent- or other industrial or intellectual property rights. philips semiconductors C a worldwide company contact information for additional information please visit http://www.semiconductors.philips.com . fax: +31 40 27 24825 for sales of?ces addresses send e-mail to: sales.addresses@www.semiconductors.philips.com . printed in the netherlands 613518/04/pp 8 date of release: 2001 sep 27 document order number: 9397 750 08697
|
